SKU: 13025595634
sprinter markise befestigen

sprinter markise befestigen Dachträger

$19.94 $22.16
Save 10%
No.2 Bestseller on streamingart.org >

Pay in installments of $5.54 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 30 - Oct 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

sprinter markise befestigen DachträgerDACHTRGER NUR KOMPATIBEL MIT EINER MONTIEREN THULE OMNISTOR 6300 (AN DEN PILZKPFEN MONTIERTEN THULE OMNISTOR MARKISEN) Dachtrger fr Fiat Ducato, Citroen Jumper & Peugeot Boxer, Movano (ab Bj. 2021) bei denen die Pilzkpfe auf dem Dach bereits durch die Markise genutzt werden (Thule Omnistor6300). Zustzliche Querstreben dazu bestellen und Sperrgut Versandkosten sparen. Warum unser Dachtrger Set die beste Wahl ist Passgenau: Entwickelt speziell fr Fiat

DACHTRÄGER NUR KOMPATIBEL MIT EINER MONTIEREN THULE OMNISTOR 6300 (AN DEN PILZKÖPFEN MONTIERTEN THULE OMNISTOR MARKISEN)

Dachträger für Fiat Ducato, Citroen Jumper & Peugeot Boxer, Movano (ab Bj. 2021) bei denen die Pilzköpfe auf dem Dach bereits durch die Markise genutzt werden (Thule Omnistor6300).

Zusätzliche Querstreben dazu bestellen und Sperrgut-Versandkosten sparen. 

Warum unser Dachträger-Set die beste Wahl ist

  • Passgenau: Entwickelt speziell für Fiat Ducato, Citroen Jumper, Peugeot Boxer und Movano(ab Bj. 2021) mit einer montierten Thule Omnistor 6300
  • Flexibel: individuell verstellbare Querstreben. Herkömmliche Nuten Typ-B für maximale Flexibilität
  • Einfache Montage: Kein Fachwissen notwendig – Anleitung inklusive.
  • Langlebig: Robustes Aluminium und Edelstahl für maximale Stabilität und Belastbarkeit.

Ideal für Camper, die ihre vorhandene Markise weiter nutzen und dennoch einen Dachträger aufbauen möchten.


Dieses Dachträger-Set wurde speziell für die Kombination mit deiner bestehenden Thule Omnistor Markise entwickelt – ganz ohne Demontage der bestehenden Markise oder ihrer Verklebung. Die originalen Thule-Aluminiumhalterungen bleiben vollständig erhalten.

Unser hochwertiges Dachträger-Set bietet dir eine flexible DIY-Lösung für deinen Camper oder Transporter. Passend für alle Fiat Ducato, Citroen Jumper und Peugeot Boxer-Modelle ab 2006, ermöglicht es dir, dank unserer beliebig verstellbaren Querstreben, deinen Camper individuell zu gestalten und optimal zu nutzen.

Vielseitige Nutzungsmöglichkeiten

  • Dachterrasse: Baue dir eine komfortable Dachterrasse für Campingausflüge.
  • Dachboxen: Befestige Dachboxen, um zusätzlichen Stauraum zu schaffen.
  • Solaranlagen: Sichere Montage von Solarpanels für autarkes Reisen.

Aufsatz-Querstrebe für einen einfachen Auf und Abbau deines Dachzelt oder Dachbox

Dank der variabel montierbaren Querstreben (z. B. bei Dachfenstern) bietet unser Dachträger maximale Flexibilität. Weitere Querstreben findest du in unserem Zubehörsortiment.

Hochwertige Qualität 

Unsere Dachträger werden in Deutschland aus 30x45mm Aluminiumprofil gefertigt. Die Dachträger sind leicht, strapazierfähig und schwarz pulverbeschichtet für eine edle Optik.

  • Keine TÜV- oder ABE-Eintragung in Deutschland erforderlich.
  • (Für andere Länder kann eine Einzelabnahme notwendig sein.)

Technische Daten – Dein perfekter Begleiter

  • Gewicht: ca. 18-22 kg (je nach Variante)
  • Breite: 1570 mm
  • Aufbauhöhe: Nur ca. 8 cm in der Fahrzeugmitte

Längen:

  • L1: 2710 mm (Fahrzeuglänge: 4963 mm, 3 Pilzköpfe/Seite)
  • L2: 3050 mm (Fahrzeuglänge: 5413 mm, 3 Pilzköpfe/Seite)
  • L3: 3630 mm (Fahrzeuglänge: 5998 mm, 4 Pilzköpfe/Seite)
  • L4/L5: 4000 mm (Fahrzeuglänge: 6363 mm, 5 Pilzköpfe/Seite)

 

Tragfähigkeit:


L1 & L2: Dynamisch bis 100 kg, statisch bis 400 kg
L3 & L4: Dynamisch bis 150 kg, statisch bis 500 kg
(bei gleichmäßiger Gewichtsverteilung und Verwendung aller Fixpunkte/Pilzköpfe)


Lieferumfang – Alles, was du brauchst

Unser Dachträger-Set wird als DIY-Komplettpaket geliefert, damit du den Dachträger mühelos selbst montieren kannst:

  • 6 Querstreben
  • Benötigte Pilzkopf-Halter
  • Befestigungsmaterial
  • Montagezeichnung
  • Adapter für Thule Omnistor Markise

(Hinweis: Die Anzahl der Querstreben auf den Bildern kann abweichen.)

 

Mache dein Fahrzeug mit unserem Dachträger-Set zum Allrounder – ob für Abenteuer, Arbeit oder Freizeit. 

 

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13025595634

Discover Niche Categories That Outsell sprinter markise befestigen

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Ezra
Phoenix, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
N
Verified Purchase
Nikki05
Louisville, US
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
R
Verified Purchase
Raniel Nebrida
Battle Creek, US
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
C
Verified Purchase
CJKA
San Leandro, US
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
K
Verified Purchase
Karen Czadzeck
Birmingham, US
★★★★★ 5
Good Buy
Size: 8inches-56pcs
I use a lot of these ties. They work well and the velcro lasts and doesn't get worn. This is a good value and keeps cords from looking like a spaghetti factory, no tangling keeps them under control. Would buy again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026

recommand products

MORLEY 20/20 VOLUME PLUS PEDAL
26.47
Morley 20/20 Volume Plus Effects Pedal 197881123765
27.42
H.O.E ULTA-MAT TROLLING MOTOR FOOT PEDAL KIT
29.07
Wahoo Powerlink Zero Dual-Sided Power Pedal System
24.77
Pedalachsen und Muttern · Ersatzeile – TATZE
29.83